| Marine Radio Article | Marine radio information and more found below this article Marine VHF radio is installed on all large ships and most motorized small craft. It is used for a wide variety of purposes, including summoning rescue services and communicating with harbours and marinas, and operates in the VHF frequency range, between 156 to 174 MHz. Although it is widely used for collision avoidance, its use for this purpose is contentious and is strongly discouraged by some countries, including the UK. A marine VHF set is a combined transmitter and receiver and only operates on standard, international frequencies known as channels. Channel 16 (156.8 MHz) is the international calling and distress channel. Channel 9 can also be used in some places as a secondary call and distress channel. Transmission power ranges between 1 and 25 watts, giving a maximum range of up to about 60 nautical miles (111 km) between aerials mounted on tall ships and hills, and 5 nautical miles (9 km) between aerials mounted on small boats at sea-level. Frequency modulation is used. Marine VHF mostly uses "simplex" transmission, where communication can only take place in one direction at a time. A transmit button on the set or microphone determines whether it is operating as a transmitter or a receiver. The majority of channels, however, are set aside for "duplex" transmissions channels where communication can take place in both directions simultaneously . Each duplex channel has two frequency assignments. This is mainly because, in the days before mobile phones and satcomms became widespread, the duplex channels could be used to place calls on the public telephone system for a fee via a marine operator. This facility is still available in some areas, though its use has largely died out. In US waters, Marine VHF radios can also receive weather radio broadcasts, where they are available, on receive-only channels wx1, wx2, etc.
|
|